7Pin Laser On/Off Winch Rocker Switch Red
7Pin Laser On/Off Winch Rocker Switch Red is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
International Shipping
Nilight is shipping worldwide covering North and South America, Europe, Asia, Africa, Oceania and more.
We employ the services of major, trusted international carriers to ensure your package arrives at your destination safely.
U.S. domestic orders are shipped from our USA warehouse for the fastest delivery times but exceptions may occur.
Shipping Time
U.S. domestic shipping: about 3-7 Working Days
International shipping: about 8-15 working days
A standard processing time of up to 48 hours is required before the order is shipped out.
Due to challenges posed by the pandemic, our carrier is temporarily experiencing shipping delays, which may delay your delivery. We are always work to get your package to you as quickly and safely as possible.
Shipping Cost
We offer free shipping on all of our products to customers in the Continental U.S. when orders over $19.99. Customers in other regions need to pay additional shipping costs(Specific amount please kindly refer to your checkout page).
Tracking
Your tracking number will be sent in email immediately after we ship the order out. You may follow the link in the email to check the estimated arrival time of your order.
(Please note that tracking information will only be updated online in 1 working day after your order has been shipped.)
7Pin Laser On/Off Winch Rocker Switch Red
Description
Description
About this item
Easy to install and use: 7-pin on-off-on rocker switch with DPDT design (double pole double throw), simple installation, can control 2 circuits.
Cool illuminated light: built-in two premium LEDs Emit soft light to illuminate the patterns, easy for you to find the switch in the dark.
Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away.
Wide range of applications: Universal fit for all cars, RVs, SUVs, ATVs, UTVs, Cans, Buses, Marine boats, Yachts, Trailers, Jeeps, Pre runners, Campers, Caravans, etc; Mainly used to control Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump or led light bar, led work lights, fog lamps, headlights, taillights, and auxiliary lamps, etc.
Package Includes: A 7 PIN switch, jumper wires set, and a wiring diagram.
Material: Superior ABS+PC; Rated at 12V 20A and 24V 10A DC.
Material: Superior ABS+PC; Rated at 12V 20A and 24V 10A DC.
SPST design (Single Pole Single Throw); Built-in 2 LEDs, laser-etched pattern.
Mounting Hole Size: 1.43in(37mm) x 0.84in(21.3mm).
Application:
Fits most cars, SUVs, ATVs, UTVs, 4X4, motorcycles, trucks, Jeep Wrangler, boats, yachts, and other off-road vehicles.
Mainly used for controlling LED light bars, LED work lights, fog lamps, driving lights, headlights, taillights, off-road lights, boat lights, etc.
Product Details
Durable In Use
The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use.
Easy Installation
This switch is simple to install, product comes with a wiring diagram which makes it easy to wire the jumper wires in two seconds.
Premium Jumper Wires
The jumper wires are made of high-quality 14 gauge wires.
The Tin-plated copper terminals on the wire are of good stability, wear resistance, and corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better.
Excellent Product
Made of ABS and PC of premium quality, the switch is impact and heat-resistant. all patterns are laser etched directly onto the switch surface to ensure long-lasting durability.
Applications
Use on Marine Boat
Marine-grade Construction and IP65 Waterproof: It adopts a high-quality Aluminum panel, Scratch-proof, and Corrosion Resistant, with a rubber-sealed cap for all sockets dust-tight and debris-proof.
Wide Application
The product is suitable for controlling all electronic equipment on board. Available for upgrading headlights switch, fog light switch, wide light switch, car refrigerator switch, and car vacuum cleaner switch replacement. etc.
Car Electronic Device
The product is suitable for UTVs and ATVs.
Installation is simple and can be mounted horizontally or vertically. You can even use it at -25°(Min) or 80°(max). Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailers, RV, caravans, buses, marine boats, yachts, airplanes, etc.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Customer Reviews
Utiliser pour ma chute à neige !!
Amazon said it won't fit, I didn't see that until already ordered but you can see in the pic the top and bottom is flush but the middle sticks out just a hair. I took the little rubber gasket off the switch and shaved a little off the sides of the dash hole, now it's flush.And as others said, you may wire it different than described. I spliced from factory winch connector to give me power on, winch in, winch out. Then of course you need a ground and I used one of their jumper wires to connect the upper and lower light portion together then spliced them with the illumination wire on my headlight switch (right beside it) so when key turns over the whole thing lights up. Didn't even use the "ignition" postI let the winch all the way out and had a friend try to keep it from cranking in while I pulled it all the way in, he failed. It works just fine and its nice to have control right there in arms reach. My factory remote has 20 foot of cable that I never even un-zip-tied, that's just a pain to deal with BUT I will store the factory under my hood in case something ever goes wrong with the switch
Amazon said it won't fit, I didn't see that until already ordered but you can see in the pic the top and bottom is flush but the middle sticks out just a hair. I took the little rubber gasket off the switch and shaved a little off the sides of the dash hole, now it's flush.And as others said, you may wire it different than described. I spliced from factory winch connector to give me power on, winch in, winch out. Then of course you need a ground and I used one of their jumper wires to connect the upper and lower light portion together then spliced them with the illumination wire on my headlight switch (right beside it) so when key turns over the whole thing lights up. Didn't even use the "ignition" postI let the winch all the way out and had a friend try to keep it from cranking in while I pulled it all the way in, he failed. It works just fine and its nice to have control right there in arms reach. My factory remote has 20 foot of cable that I never even un-zip-tied, that's just a pain to deal with BUT I will store the factory under my hood in case something ever goes wrong with the switch
The way that the instructions show you how to wire it up for a winch It will not work. The switch is not rated for the current. There is another review That tells you how to wire it up Where the LEDS are on And The switch is wired properly to control the winch. Other than that it's a good looking switch And we will see how long it lasts.
I installed this switch in the overhead console of my JD tractor. I wired it to a linear actuator toposition the discharge shut on my snowblower. It works great!
S'installe et ce connect facilement
Ordered it to control my bull bar light, works great!
The media could not be loaded. put in place as a secondary switch so i dont have to take out the winch controller cord. works like a xharm
Positive activation, looks good and was very easy to install
Positive activation, looks good and was very easy to install
