5.7 Inch 50W 6500LM Round Spot Flood LED Work Lights (Pair) | 16AWG DT Wire

I use them on the back of a service truck. They are incredibly bright, the pattern is great. 10/10 would recommend.

Very bright. Decent harness. All hardware was included

I race and chase a VW class 11 in Baja and bright lights are very important. We’re sponsored by Baja Designs and their lights are top quality. They’re rebuildable, you can change out the lenses, and customer service is amazing. But the lights I ordered from them for my chase truck didn’t come in time so I got these as backups. And honestly? I have no regrets; these are stupid bright with a fantastic beam pattern. Like an actually usable spot beam pattern that throws light in a tight pattern, unlike most cheap LED lights that just blast diffuse light everywhere close but do very little in the far field. In terms of brightness and beam pattern, they’re pretty similar to BD Squadron Pros with a spot pattern, which we have on the race car.The wiring harness is nice quality as is the switch. The connectors are Deutsch-like connectors so you can also make your own harness if the one it comes with doesn’t suit your needs. The brackets required a little grinding to open them up enough to allow the bolt to fit and lock in place. Annoying but by no means a deal breaker. The hardware is good quality and besides having to grind a little, installation/aiming was easy.My Baja Designs lights naturally showed up after the Baja 1000 but I think I’ll leave the Nilight ones in place. Will Nilight repair them or sell different lenses like Baja Designs? Probably not. But given the price, brightness, and usable beam pattern, it’s a solid deal. I’m not sure how they’ll hold up to continued use but will update as needed. I was able to get these free through the Amazon vine program, but they’re so good that I’ve also purchased the 7” and 9” versions for my other vehicles.

I waited a bit to review these, because I've noticed that some LEDs lose brightness rather quickly. Well, these don't. At least they don't after about a month of use. They are still extremely bright.They are very easy to install and just as plug and play as it says. One thing I would recommend is aiming these, turning them on, and then walking away from your vehicle and taking a good look at how bright these are from another vehicle. If you are planning to be your typical Jeep bro and turn on every light you have, aim these things down so they don't blind other drivers.Overall, I'm quite pleased with these. Even the build quality is quite nice.

I love these lights! They are very bright and give a good balance of flood and spot.. The box comes with everything you need which made it very simple to hook up. Time will tell how they last but so far so good.

Super easy installation with easy to follow steps. Mounted the lights on my Nilight bumper winch hoop. I think they look great there although I'm considering installing them on the "A" pillars instead.Routing the wiring was just as easy (forgot to take those pics). I already had winch cables from the front bumper to the battery so I took the two leads for the lighting and zip tied them to my winch cables and make the connection to the battery. From there I took the included switch wire and zipped it to the factory loom along the top of the firewall over to the driver side and pushed it through the firewall using the clutch pedal hole not used for my automatic. That rubber grommet is easy to penetrate from the inside using a wire coat hanger or in my case a piece of romex wire.I have not yet mounted the included switch. I'm considering ordering an overhead switch panel so for now I have it hanging by the steering column.Very impressed with the lighting and the quality of these. Can't wait for my next night time off-road adventure.

So I have been looking at my fancy 1/4" aluminum JK bumper with its hoops all ready for light pods, round lights or a light bar, yet forlornly without any of them them for a couple of years now.That ended last night with this pair of very nice looking, and well functioning, combination spot and flood lights. Install was not difficult at all. Mounting on my hoop was easy.And electrical work was not difficult at all, with all the kit, connectors and wiring to accomplish that. While I cannot speak directly to longevity, the large Wrangler user forum I belong to has several members with this maker of lighting and the consensus is they are well made, durable and well weather protected. these are rated a very good IPX8 and the water protection along the housing looks great.The light pattern is quite good. with a long reach on the spot aspects and fairly good flood pattern.Lastly I am not getting any secondary effect on my other lighting or radio as sometimes occurs with cheaper aftermarket LED lights.

This was a perfect addition to a brush truck that spends a lot of time in areas where visibility is low and light output needs to be extremely bright to avoid obstructions. After upgrading the vehicles headlights and trying various other fog lights and light bars, these are a clear winner. They are brighter than any other light i've tried, and they also compliment the vehicle by giving it an aggressive and down to business look. I would recommend these lights to anyone that is looking for a set that do quite a bit more than those dinky little spot lights they call fog lights these days.

My husband was so excited about these lights for a couple reasons... one: SUPER EASY TO INSTALL! it came with all the wiring needed, which he says is a huge time saver, because normally these types of kids don't come with the wiring. He was so excited about how easy they were to put on and get them going.Two:SUPER BRIGHT! He has about 5 acres to mow; and on days that it's 100 degrees, he really wanted the option to be able to mow at night when it's cooler, but there's never been enough light before.That is NOT a problem any more!!! They worked every bit as well as he could have hoped for, and he's so happy to have lights on his tractor/mower now!

Not sure if these are supposed to come with instructions, but mine didn’t. Not terribly difficult to figure out where everything went, but basic instructions would be helpful.The lights are heavy and seem quite well made. They put out a lot of light. I will try and upload a pic of light throw later. Overall I am very pleased.