2Pcs 4FT Spiral Antenna Led Whip Light RF Remote Control | 8.6FT Wire 5Pin Switch
Related Video
About this item
Cool Design with 200% Brightness: Spiral design to glow in 360°direction, and light up the night with hundreds of dancing patterns like the chase, build-up, strobe, pulse, scan, stack, etc, and 12 solid colors. 200% Super brighter, Always ensure stand out in the ride and are safe on the night trail without being left out
Premium Built To the Last: Using a flexible Polycarbonate tube, add proper flexibility for to prevent breakage or snapping at the base but will not over-bounce to hit your cab. The quick-connect/disconnect base is upgraded to a fixed one to lock the whip light to prevent it from spinning around. The 4 Pin plug-and-play connector is upgraded in premium built and all hardware is upgraded in stainless steel. IP67 is waterproof, sand proof, and shockproof. Durable to last
One-to-one Remote Control: You can freely set into/remove the one-to-one remote control mode. Hassle from others' remote control interference if you don’t like it, and can easily pair with others when you remove the one-to-one remote control mode. (Note: See guidelines & tips in the user manual)
Better Battery Protection: Provide a whip light rocker switch for your use. You can connect the whip light to the rocker switch first instead of to the battery directly, avoiding draining the battery. (Note: See guidelines of rocker switch connection on the user manual)
Simple Installation: Just quickly release the base, mount it on a 12mm hole, and then quickly connect the base with a whip light. For wiring, just plug and play the whip lights with the 2-way splitter, and then connect it to the rocker switch and battery. You may need extra wire in this part. (See guidelines of rocker switch connection on the user manual) 2 years warranty honored by Nilight
200% Super brighter, standing out with the coolest modes in the ride
Glow in 360°direction, including 366 spiral chasing patterns &12 solid colors
Built-in premium quality to last
Upgraded whip light tube for no snap
Upgraded connect/disconnect base for no rotating/spinning wire
Upgraded quality 4 Pin plug-and-play connectors
Upgraded stainless steel hardware
Able to set into one-to-one remote control mode to prevent other's remote interference
Additional whip light rocker switch provided for better battery protection
Specification
Tube Size | 4ft from tube to base |
Wire Length | 8.6 Feet |
LED Type | 5050 RGB |
LED Lumen | 20-22LM |
Material | Flexible Polycarbonate tube |
Base | Aluminum spring base |
Operating Voltage | 12V DC |
Operating Temperature | -20℃ to 45℃ |
Waterproof Rate | IP67 |
Lifespan | Over 50,000 Hours |
Lighting Patterns | 366 dancing patterns(chasing, build-up, strobe, pulse, scan, stack, and more), 12 solid colors |