- Check Which is Right Before Buying: If your motorcycle does not have a brake light/tail light on the rear fender, then you can install this turn signal on the front and rear of the motorcycle, if your motorcycle has, then turn signal can only be installed on the front. NOT fit All Harley European Version
- Worth Upgrading: With 48pcs high intensity LEDs that illuminate for a highly visible turn signal that is over 3 x brighter than stock, bright enough and over 50000 hours lifespan, definitely a great-looking safety upgrade
- Plug and Play: Easy to install within a few minutes, plug and play design with 2” bullet style on most Harley Davidson models. Installation typically takes about 5 minutes. Pop off the lens, replace the old one with your new LED turn signal, put the lens back on and go for a ride
- Compatibility: Harley Davidson 1986-2023 including Dyna, Touring Street Glide , Electra Glide, Road Glide, Road King, Tri Glide, Fat Boy, Softail, Sportster and other models with 2 inches standard bullet-style turn signal lights and 1157 sockets. Does NOT fit 3-1/4” flat-style turn signals
- Tips: For 2011-later Softails, 2012-later Dynas, 2014-later Sportsters & Touring, Tri Glide Harley bikes need a load equalizer, 2 Years Warranty Honored by Nilight
Brighter & Safer for your riding
LED Turn Signal Tail Lights for Harley Davidson (1157 Double Contact)
- Diameter: 2Inches
- Socket Type:1157 Double Contacts
- 2 Lighting Modes: low beam as running light, high beam as turn signals or brake light
- Ideal for Harley Dividson models: Softail, Dyna, Sportster, Touring, Tri Glide
- NOT Fit: CVO/Ultra Classic/Limited/Ultra Limited, CVO, all Harley European Version, 3-1/4" Flat Style turn signals
Key Features
2" Bullet Style 1157 Double Contacts
If you do NOT have a center rear tail light, you can install them on both front and rear of your motorcycle, if there is a center rear tail light, the turn signals only fit the front.
Worth Upgrading
Using premium LED chips that are low-consumption but 4 times brighter than halogen bulbs, they are easily noticed from behind even in the daytime for your safer riding
How to Install the Motorcycle Tail Lights?
Step 1
Remove the plastic cover.
Step 2
Rotate out the halogen bulb.
Step 3
Plug in the new signal light.
Step 4
Put the plastic cover back on.
| Compatible with |
Harley models with 2 inch bullet style and 1157 double connection points |
| Compatible with |
Softail 2011-2021(excluding 2014-17 FLSTN & FLSTF / 2016-17 FLSTSB / '14-16 FLSTFB) |
| Compatible with |
Dyna 2012-2021 (excluding 2014-17 FXDF / 2014-17 FXDB) |
| Compatible with |
Sportster 2014-2021 (excluding 2014-18 XL 1200C / 2014-19 XL 883L / 2014-17 XL 1200T / 2016-20 Roadster ) |
| Compatible with |
Touring 2014-2021 (excluding CVO/ FIHRXS / FLTRU / FLTRX / FLHTCU / 2019-21 FLHT / CVO FLHTKSE / FLHTK / FLHTCUTG / FLRT ) |
| Compatible with |
Tri Glide 2014-2021 (excluding CVO / 2014-2021 FLHTCUTG) |
| NOT fit |
3-1/4" Flat Style turn signals |
| NOT for |
Single contact (1156 plug) turn signal lights replacement |
Important information & Legal Disclaimer
This item is not a licensed Haley. We do not claim ownership and have no affiliation with Haley Davidson. Any Haley Davidson copyrights and trade marks belong to the respective owners. Unless specifically identified as such, our use of third party trade marks does not indicate any relationship, sponsorship, or endorsement between us and Haley Davidson. Any references by us (or company name) (or the seller) to third party trademarks is to identify the corresponding third party's goods and shall be considered nominative fair use under the trade marks law.
