About this item

Multiple Functions: Mainly used for flag hitch mounts, stably holding and flying your proud flags while driving, in the parades. Can also be used to mount any other suitable size sticks with your wisdom, such as antenna, patio umbrella, etc for an easier life

Higher Compatibility: The flag holder is universally for a 2in hitch receiver. And suits a wide range of flagpole sizes, from 1in to 2.3in in diameter. Also, its bottom is designed to fully open to allow rest to ground and prevent water or dust from buildup

Adjustable Mounting: When sliding the flag holder to the hitch receiver, there are 3 hole positions to opt and adjust the remaining space for a possible spare tire or tailgate. The maximum space for a spare tire or tailgate is 13inch wide. You will need to measure your spare tire's thickness to confirm. Please note tailgate can only rest down halfway

Easy Installation: Just insert holder to hitch receiver, lock with hitch pin and clip; And then place pole into the holder, tighten up and fix the pole with the knob type screws; Note: Flange pipe sockets are optional to use when your pole is equal or less than 2in; Square wire lock pin is also optional for bottom close

Quality-built & All in a set: Made of heavy-duty steel and durable powder coating. And comes with all hardware for your possible needs. Includes 1 x flagpole holder, 2 x types mounting screws, 1 x hitch pin & hitch pin clip, 1 x square wire lock pin, and 2 x 2in flange pipe sockets

High Compatibility

Hitch Receiver Size

Universally fit with 2in hitch receiver

Flag Pole Size

Suits different pole sizes from 1in to 2.3in; Add 2in flange pipe sockets When you mount a pole size equal to or less than 2in

Pole Length

It suits both long or short poles, you can opt to rest on the ground or not

Remaining Space

Remain a maximum of 13in wide space for a possible spare tire. The tailgate can only rest halfway down.

Quality Built-in A Set

knob Type Bolt

Comes with a quality knob-type mounting bolt, easy to tighten up

Hitch Pin & Clip

Connect and lock with the hitch receiver

Square Wire Lock Pin

Optional to use when you want the bottom closed

Solid Build

Made of 2mm/0.08inch thick heavy-duty steel and durable powder coating

Wide Applications

Universally compatible with 2in receiver on many vehicles such as SUV RV Pickup Truck Camper Trailer Jeep etc.